Skip to content
Australia · United States · Global enquiries
Vehicle & system guideAboutSupportSearchAccountBasket 0
Australian dollar ($) - AUD
  • Australian dollar ($) - AUD
  • United States dollar ($) - USD
Discuss a project ↗

Standardise electric A/C installations for a restoration or fabrication workshop

TRADE & INTEGRATORS

Standardise electric A/C installations for a restoration or fabrication workshop

Convert repeat builds into a controlled workshop package. Select a small number of compressor and heat-exchanger combinations, then standardise brackets, hose sizes, protection, wiring and commissioning records.

See relevant productsRequest a technical quote
BEST STARTING POINT

A repeatable 12 V and/or 24 V system specification with vehicle-specific mounting and hose details documented per build.

SYSTEM APPROACH

How this comes together

01

Base package

Choose a standard compressor, condenser, evaporator, drier, pressure switch and harness set.

02

Vehicle kit

Add mounting brackets, line lengths, bulkhead fittings and ducting for each platform.

03

Commissioning

Record vacuum hold, charge, pressures, vent temperatures and electrical load for every delivery.

BEFORE BUYING

Information that confirms the selection

Provide what you know. Unknown items can be resolved during technical review.

  • Common vehicle platforms
  • Expected annual quantities
  • Preferred 12 V or 24 V architecture
  • Typical cabin and engine-bay constraints
  • Workshop hose/crimp capability
  • Documentation and spares requirements

CONFIGURED PROJECT

Need the parts confirmed as one system?

Send the application, voltage, available power, operating environment, required duty and installation constraints. We will review the configuration before quoting.

Start this project enquiry
Photography credits

Aircraft: Jelle Vandebeeck, CC BY 2.0. Workboat: Photo: Gordon Leggett / Wikimedia Commons, CC BY-SA 4.0. Caravan: Bahnfrend, CC BY-SA 4.0. Command post: U.S. Army, public domain. These photographs are resized for display and may be cropped to fit the page; the credited photographs retain their original licences. General application photography does not confirm a particular vehicle installation or endorsement.